Build your own shed with aerated concrete blocks - Build cheaply

Tutorial: Build your own shed with aerated concrete blocks

Want to build your own shed inexpensively? Then aerated concrete blocks are the perfect choice! These lightweight and insulating blocks are easy to work with and offer numerous advantages. This tutorial explains how to do it step by step.

1. First determine the dimensions of your shed and make a detailed design.
2. Start by laying a solid foundation, for example, of concrete.
3. Place the first row of aerated concrete blocks on the foundation and ensure they are level. This is best done with a base layer mortar.
4. Then continue stacking the blocks, using aerated concrete adhesive and a notched trowel to secure them. We have different notched trowels available for every wall thickness. This allows you to work more neatly.
5. Make sure each layer is properly aligned and check regularly for levelness. Use our 100mm spirit level or our small pocket-sized spirit level for this.
6. Don't forget to leave openings for windows and doors clear while stacking. The overhead structure can be supported with aerated concrete lintels. Ask your structural engineer which one is suitable for your shed.
7. Once all the walls are finished, you can install the roof frame and cover it with roofing material of your choice.
8. Finally, you can finish the interior walls, install electricity and add insulation if necessary.

With these simple steps and the right materials, you can build your own shed with aerated concrete blocks. Good luck!

FAQ: Building a shed yourself with aerated concrete blocks

How do I determine the dimensions of my shed?

- Measure the desired length and width of the shed and make a detailed design.

Which foundation is suitable for aerated concrete blocks?

A solid concrete foundation is ideal. Always consult a structural engineer.

How do I ensure that the aerated concrete blocks are level?

Place the first row of blocks on the foundation and check that they are level. The first layer, the so-called ridge layer, is set in a ridge layer mortar.

What do I use to attach the blocks together?

- Use mortar to firmly connect the blocks together as you stack them.

How do I keep everything aligned?

- Check regularly whether each layer of blocks is still level.

Do I need to leave openings for windows and doors clear when stacking?

Yes, take into account openings for windows and doors while stacking. Place the necessary aerated concrete lintels above these openings.

What is the last thing I should do after stacking the walls?

• Install the roof frame, cover with roofing material, finish interior walls, install electrical wiring, and add insulation.

Always seek technical advice from your manufacturer.